Configure Point Credit Card Static IP Address for terminals for POR Enterprise:
Go to Counter System>Tools, in the upper left corner of the screen.
Select Printer Set Up
Go to Advance Tab – Make sure there is a terminal assigned under Verifone Terminals.
Check to see if there is a Static IP address assigned.
Go to Security>Verifone Terminals.
This will display the terminal and IP Address (if assigned) if not go to:
Go to Start bottom left corner
Use the command prompt and ping to find an unused static LAN; make sure it is not in DHCP range.
From the credit card terminal device.
Press 1+5+9, then 166832 to login.
Navigate to Administration > Communication > Network > Ethernet.
Click ‘Mode’ and change to ‘StaticIP’ and click OK.
Configure the static IP address, netmask, gateway, DNS1 and DNS2 addresses.
Click Apply button in the upper right.
Click the ‘Home’ link in the upper left then click the ‘Reboot’ button. Run all POR updates
We should be able to get the IP FROM POR.